Step by Step: How to Install Plain End Scroll Saw Blades

Young female architect helping male colleague making elements on scroll saw

Are you figuring out how to install plain-end scroll saw blades? Thankfully, this guide has detailed facts that can assist you in installing it successfully. A scroll saw is a basic tool that you can never overlook for your woodworking projects.

You will encounter two types of scroll saw blades; plain end and pinned saw blade. A pinned saw blade features two pins in the end that rest on the blade holder. One can tighten the blade holder to provide the correct tension for the blade.

The plain end blades have no pin, so the clamp holds them together instead. Such clamps are a section of the scroll saw and are easier to find. While you subject them to frequent use, they become dull and need a replacement. Pinless (Plain End) vs Pinned Scroll Saw Blade

Related Posts:

We will uncover the correct procedure of installing plain end scroll blades to keep your device working at its best to make accurate cuts always.

The Procedure of Installing Plain End Scroll Saw Blades

Safety

Safety should come first whenever you are maintaining or using a power tool. Such equipment holds stored energy when wrongly released could be hazardous. Firstly, it could cause deep cuts, lesions, or cause death through electrocution in extreme cases.

Before you change the blade, it is critical to unplug the scroll saw for a power source. If many people are using the device, then a note would do. Let the note inform the next user about disconnecting it from the power source to prevent any unintended startups.

Lastly, ensure that you wear protective gear to remain safe always. Such include eyeglasses, gloves, and safety boots.

Prepare the Scroll saw Blade Assembly

The assembly largely depends on the type of brand you are putting it to use. For that reason, you should account for all the required components. In several cases, you may need a clamp, an Allen key, and a blade.

Perform an inspection of the blade and clamp to verify if they are in the proper condition. Ensure that it is free of damage and rust as it affects the performance of the device. Again, it is a safety concern since it causes the blades to fly off.

Clamp the Saw Blade

  • Grab the blade and the clamp and guide the end of the blade via one of the openings found on the clamp.  Ensure that the cutting edge has the right orientation.
  • Ensure the blade end runs via both screw surfaces to get the right blade length for the clamp.
  • Use the Allen key to screw the blade to ensure that blade is in the middle of the screws firmly.
  • Avoid over-tightening the screws since it may lead to damaged threads. On tightening guides, you can refer to the manual.
  • Hold both the clamp and the blade upright. Ensure that this blade stretches straight down the clamp. Any deviation may result in breaking or kinking when in operation.
  • Install the second clamp on the other side and inspect it for straightness. Other models feature a guide on the upper arm for accurate blade installation.

Remove the Old Blade

When you untighten the screen, the scroll blade will come off. If it does not fall, you should drive it away from the same blade from the screw sideways. Alternatively, you can pull it to remove it.

Install the Blade Assembly

It all depends on the scroll saw that you are using. For example, it could have a removable blade throat plate necessary for inserting the blade assembly. Alternatively, it could have as lit for guiding your blade assembly via the table. 

In all cases, that should be a camping mechanism on the table to clamp the hooks onto. Maintain the low tension at the upper clamp before you hook it onto the upper clamp holder.

Install the Scroll Saw Blade

Place the blade in the blank slot found on your scroll saw. However, before installing this blade, you should gauge its quality. Avoid a cheap option because it is prone to frequent breakages. Grabbing the top-rated choice gives you an edge over longevity.

Before inserting the blade, ensure you remove the old blade as you pull it towards you. You can place the new option by pushing it towards the saw. After that, you can now retighten the blade with screws.

Ensure you use a straight blade to prevent getting crooked cut. Tightening the saw blade ensures the blade is in the right position firmly. Use the Allen scree for performing the tightening procedure.

Adjust the Tension

Connect the saw onto a power source and run it for a few minutes to discover if the blade can loosen. Such a practice is necessary because a blade will tend to stretch at the initial stages after turning on the saw. Locate the tension adjustment knob and adjust the tension again.

Run the Scroll Saw Machine

It is the last stage of installing the plain end scroll saw blade. It is the testing of the saw to see if it is in the proper order. If you are a beginner, you can place a new piece of material and try to design and see how effective it is.

For example, it is now the right time to check the device’s functionality as you put it to use. When it does your work with a high level of output and consistency, you can handle other tasks requiring its service.

Conclusion

Scroll saws come in several models and designs. As such, it calls the user to consult the specific manual always before performing any maintenance procedure. If the scroll blade is defective, then the user will experience poor delivery. 

Before working with a scroll saw tool, ensure that you rank safety first. Wear safety garments to protect your face and hands from any harm or danger. When the scroll saw blade is in the correct form, it becomes easy to handle your tasks effectively and efficiently. We are lucky to be the reason you can now install the plain end scroll saw blades alone!

Marcus Weldman

Marcus Weldman is the main author of WiseMakr.com. Marcus is a tool and DIY enthusiast. He spends his time discovering the comparative differences and practical limits for all kinds of tools.